Pad printing is the process used to transfer ink from an etched printing plate onto any kind of surface using a silicone rubber pad. The main advantage of this method is it has the ability to print on any kind of irregular surface. It is more suited for small print areas rather than larger ones.

A block charge is applicable to produce the etched printing plate. The type of ink required differs according to the material (plastic/metal) you wish to print on.

Plastic Pen Charges
Quantity	Charge Per Colour Per Piece (RM)	Block Charge Per Colour (RM)	Packing OPP Bag Charges
≤ 300, min charge RM30		40	-
301-1,999	0.11	40	-
2,000-2,999	0.10	40	-
3,000-3,999	0.09	40	-
4,000-10,000	0.08	F.O.C.	0.02
> 10,000	0.06	F.O.C.	0.02

Metal Pen Charges
Quantity	Charge Per Colour Per Piece (RM)	Block Charge Per Colour (RM)	Packing OPP Bag Charges
< 300, min charge of RM45		40.00	-
301-1,999	0.16	40.00	-
2,000-2,999	0.15	40.00	-
3,000-3,999	0.14	40.00	-
4,000-10,000	0.13	F.O.C.	0.02
> 10,000	0.12	F.O.C.	0.02

Silkscreen printing uses a fine mesh stretched tightly onto a frame. A negative design is created on the screen and ink is pushed through with a squeegee, making direct contact on the object. This printing is suited for medium to large sized prints. One colour is considered one print.

A block charge is applicable to create a silkscreen.

Standard Charges
Quantity	Charge Per Colour Per Unit (RM)	Block Charge Per Colour (RM)
< 100, min charge RM45		40
101-1,000	0.40	40
1,001-3,000	0.35	40
3,001-5,000	0.30	40
5,001-10,000	0.30	F.O.C.
> 10,000	0.25	F.O.C.

Umbrella
Quantity	Charge Per Colour Per Unit (RM)	Block Charge Per Colour (RM)
≤ 100, min charge RM85		35
101-300	0.80	35
301-500	0.70	35
501-1,000	0.60	35
>1,001	0.50	F.O.C.

Folded Bag
Quantity	Charge Per Colour Per Unit (RM)	Block Charge Per Colour (RM)
< 100, min charge RM60		45
101-300	0.65	45
301-1,999	0.60	45
2,000-4,999	0.55	F.O.C.
> 5,000	0.50	F.O.C.

A slight variation on silkscreen printing. However, a special attachment is used to roll the print onto curved/rounded surfaces.

Roller Charges
Quantity	Charge Per Colour Per Piece (RM)	Block Charge Per Colour (RM) Horizontal Print	Block Charge Per Colour (RM) Vertical Print
< 100, min charge RM45		45.00	50
101-2,500	0.50	45	50
2,501-5,000	0.45	45	50
> 5,000	0.45	F.O.C.	F.O.C.

Ultraviolet (UV) printing is the process of using UV inks instead of traditional inks. While traditional inks are solvent based and dried via evaporation, UV inks are cured with UV light. This method is suited for small prints with multiple colours.

UV Charges
Print Size	Quantity	Price Per Piece (RM)
1x6cm	<100, min charge RM100
	101-2000	0.90
3x3cm	<100, min charge RM180
	101-2000	1.80
5x5cm	<100, min charge RM250
	101-2000	2.50

This table serves as a general guide only. Print price is subject to the size and number of colours on the logo.

Embroidery is a process where the logo/artwork is reproduced with direct stitching onto the product.

Tier	1	2	3	4
Size (cm)	3x3 - 5x5	3x3 - 5x5	3x3 - 5x5	> 5x5
Details	Simple text	Fully embroidered	With intricate details	Multiple layering Multiple colours
Example
<100pcs Base charge (RM)	35	60	120	120
Unit price (RM)	1.20 – 1.45	1.45 – 2.15	2.15 – 3.00	3.00 – 3.60

For quantities below 100 units, a base charge is applicable on top of the unit price.
Pricing in this table serves as a general guide only.
Print price is subject to your logo/artwork. Kindly contact us directly for the final pricing.

Silicone printing uses a special ink formula that will adhere to silicone material. The temperature required for drying ranges between 120-150 °C. For printing on ready stock, silicone printing is limited to one solid colour. Multiple colour is possible if each solid colour is positioned at a different spot.

U.Price/colour	Unit Price (RM)	Block Charge (RM)
≤ 100, min charge RM110		40
101-499	1.00	40
> 500	0.85	40

Heat-transfer printing uses heat to transfer pre-printed images on a wax based ink ribbon to an object. This method is well suited for larger prints with multiple colours.

Bag charges
Size	Price Per Piece (RM)
	0-40 pcs	41-999 pcs	> 1000pcs
A4	240	4.70	3.50
A5	180.00	2.90	1.70
< A5	150.00	2.60	1.30

Umbrella charges
Size	Price Per Piece (RM)
	A4	14.40
A5	7.20

A focused laser beam is directed at a material, which then either melts, burns, vaporizes away, leaving an edge with a high-quality surface finish. The final finish look will be dependent on the base material of the object.

At Ideahouse, you’ll be able to enjoy exclusive pricing for laser services.

No block charge applicable for this type of printing.

Charges

Quantity	<50 (min charge)	51-99					100 and above
Type A	RM80	RM1.50					RM1.00
		L1	L2	L3	L4	L5	L1	L2	L3	L4	L5
		1.40	1.30	1.20	1.10	1.00	0.90	0.80	0.70	0.60	0.50
Type B	RM100	RM1.80					RM1.50
		L1	L2	L3	L4	L5	L1	L2	L3	L4	L5
		1.70	1.60	1.50	1.40	1.30	1.40	1.30	1.20	1.10	1.00
Type C	RM110	RM2.00					RM1.80
		L1	L2	L3	L4	L5	L1	L2	L3	L4	L5
		1.90	1.80	1.70	1.60	1.50	1.70	1.60	1.50	1.40	1.30

Type A: Metal Pen (except white) Key Holder, Name Card Holder
Type B: Metal Pen (white), KM75, Power Bank
Type C: Drinkware, PU Leather

Laser type of each product can be found under its product detail page.
L refers to Level according to the Preferred Agent Program

Sample charge: RM10/pc
Individual personalization: + RM2.00-RM4.00/pc
Rush Charge
<24 hours = x2
24 - 48 hours = x1.5

This serves as a guide only. Price is subject to logo size and product type. Kindly contact us for final pricing.

Debossing is a process of creating an indentation on a surface with a metal plate, resulting in a depressed impression.
A block charge is applicable to create a metal plate for stamping.

This service is only available for PU22, PU18 notebooks and PU10 Travel Organizer.

PU22 and PU18 Notebooks
Quantity	Price Per Piece (RM)	Block Charge (RM)
≤100, min charge RM100		80
>101	1.00	80

PU10 Travel Organizer
Quantity	Price Per Piece (RM)		Block Charge (RM)
	3.5cm	7cm
≤100, min charge RM100	2.50	5.00	100
>101	2.50	5.00	100

Digital foil printing bonds metallic foil to card or paper with heat using a digital printer.
Unlike traditional hot stamping, a stamping die/block is not required. This printing can be done in gold or silver with a shimmery reflective effect.

Suitable for books with paper or PU leather cover.

Charges

Level	L0 / Corporate	L1	L2	L3	L4	L5
Price/Unit	1.50	1.40	1.30	1.20	1.10	1.00

Min charge per order: RM30
Individual personalization: + RM2.50/pc
Sample Print: RM10/pc

This serves as a guide only. Price is subject to logo size and product type. Kindly contact us for final pricing.